Henan Xinhuan Polyaluminium Ferric Chloride is a high-efficiency water purifier developed on the basis of polysilicic acid and traditional aluminium salts and iron salts. Highly polymerized silicate can produce good coagulation together with metal ions. By combining the electrical neutralization ability of metal ions with the adsorption and bridging ability of polysilicic acid, the composite product has a strong electrical neutralization and adsorption and bridging effect, achieving a better water purification effect. The best treatment effect of polyaluminium ferric chloride varies with the properties of the raw water. According to different conditions, on-site debugging or beaker experiments should be carried out to obtain the best application conditions and the best dosage to achieve the best treatment effect.
1. Pump the prepared liquid into the metering tank, and add the liquid to the raw water for coagulation by metering.
2. Put this product into the alum dissolving pool at a certain concentration (10-30%), inject tap water to stir it to fully hydrolyze it, let it stand until it becomes a reddish brown liquid, and then dilute it with water to the required concentration and add coagulation. Water plants can also prepare 2-5% for direct addition, and industrial wastewater treatment can prepare 5-10% for direct addition.
3. Under normal circumstances, it is manufactured and used on the same day. Tap water is required for preparation. It is normal to have a little sediment. The flocculation and destabilization performance of polyaluminum ferric chloride far exceeds that of polysilicic acid and polymetallic ions. Compared with polysilicic acid, it not only improves stability, but also increases the ability of electrical neutralization; compared with polymetallic ions, it enhances the bonding and bridging performance. Composite inorganic polymer flocculants represented by polyaluminum silicate sulfate (PASS), polyaluminum silicon chloride (PASC) and ferrosilicon composite inorganic polymer flocculants.
Polyaluminum ferric chloride (PAFC) produced by Henan Xinhuan Water Treatment Materials Co., Ltd. is a new type of inorganic polymer water purifier. The ratio of aluminum and iron in the product is adjustable to meet the needs of different water quality. It has been used in the purification and treatment of wastewater in petrochemical, steel, coal and other industries. The results show that the agent is of high quality and low price. It is a new, efficient and stable water purifier with broad application prospects. Some people have concluded through experimental comparison that PAFC is slightly better than PAC water purifier in water purifying, but the cost of PAFC dosing is much less than that of PAC water purifier.
The main products of flocculant manufacturer Xinhuan Water Treatment are:
White polyaluminium chloride (food grade), drinking grade polyaluminium chloride, industrial grade polyaluminium chloride, anionic polyacrylamide, cationic polyacrylamide, nonionic polyacrylamide, petroleum recycling polyacrylamide, oil recovery polyacrylamide, polyacrylamide, polymer flocculant polymer flocculation coagulant, polymeric ferrous sulphate, polyferric aluminium chloride and other water treatment chemicals. Welcome customers to write to us to negotiate business! Tel/WhatsApp：+8619003830067 Email：joanna@xhwtm.com Contact:Joanna
